arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-06-12 01:53:07 +03:00
Code Activity

Add code-spell spelling checks to CI (#8067)

Browse Source 
Help find and fix silly spelling errors as they are added to the repo.
This commit is contained in:
Earle F. Philhower, III
2021-05-23 08:53:04 -07:00
committed by GitHub
parent 78a2ed6bd8
commit 60fe7b4ca8
133 changed files with 273 additions and 260 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
tools/boards.txt.py
View File

@ -79,13 +79,13 @@ boards = collections.OrderedDict([
],
'desc': [ 'These modules come in different form factors and pinouts. See the page at ESP8266 community wiki for more info: `ESP8266 Module Family <http://www.esp8266.com/wiki/doku.php?id=esp8266-module-family>`__.',
'',
'Usually these modules have no bootstapping resistors on board, insufficient decoupling capacitors, no voltage regulator, no reset circuit, and no USB-serial adapter. This makes using them somewhat tricky, compared to development boards which add these features.',
'Usually these modules have no bootstrapping resistors on board, insufficient decoupling capacitors, no voltage regulator, no reset circuit, and no USB-serial adapter. This makes using them somewhat tricky, compared to development boards which add these features.',
'',
'In order to use these modules, make sure to observe the following:',
'',
'- **Provide sufficient power to the module.** For stable use of the ESP8266 a power supply with 3.3V and >= 250mA is required. Using the power available from USB to Serial adapter is not recommended, these adapters typically do not supply enough current to run ESP8266 reliably in every situation. An external supply or regulator alongwith filtering capacitors is preferred.',
'',
'- **Connect bootstapping resistors** to GPIO0, GPIO2, GPIO15 according to the schematics below.',
'- **Connect bootstrapping resistors** to GPIO0, GPIO2, GPIO15 according to the schematics below.',
'',
'- **Put ESP8266 into bootloader mode** before uploading code.',
'',
@ -1724,7 +1724,7 @@ def package ():
newfilestr = re.sub(r'"boards":[^\]]*\],', substitution, filestr, re.MULTILINE)
# To get consistent indent/formatting read the JSON and write it out programattically
# To get consistent indent/formatting read the JSON and write it out programmatically
if packagegen:
with open(pkgfname, 'w') as package_file:
filejson = json.loads(newfilestr, object_pairs_hook=collections.OrderedDict)