arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-04-19 23:22:16 +03:00
Code

Merge pull request #1833 from esp8266/digitalPinHasPWM_fix

Browse Source 
Clean up variants, fix digitalPinHasPWM definition
This commit is contained in:
Ivan Grokhotkov 2016-04-01 19:06:16 +03:00
commit 5dd6acc4c2
13 changed files with 87 additions and 420 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
variants/ESPDuino/pins_arduino.h
View File

@ -25,46 +25,12 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 16; static const uint8_t LED_BUILTIN = 16;
static const uint8_t BUILTIN_LED = 16; static const uint8_t BUILTIN_LED = 16;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

38
variants/adafruit/pins_arduino.h
View File

@ -1,6 +1,6 @@
/* /*
pins_arduino.h - Pin definition functions for Arduino pins_arduino.h - Pin definition functions for Arduino
Part of Arduino - http://www.arduino.cc/ Part of ESP8266 core for Arduino - https://github.com/esp8266/Arduino
Copyright (c) 2007 David A. Mellis Copyright (c) 2007 David A. Mellis
Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2015. Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2015.
@ -26,46 +26,12 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 0; static const uint8_t LED_BUILTIN = 0;
static const uint8_t BUILTIN_LED = 0; static const uint8_t BUILTIN_LED = 0;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

35
variants/d1/pins_arduino.h
View File

@ -26,27 +26,14 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 2;//new ESP-12E GPIO2 static const uint8_t LED_BUILTIN = 2;//new ESP-12E GPIO2
static const uint8_t BUILTIN_LED = 2;//new ESP-12E GPIO2 static const uint8_t BUILTIN_LED = 2;//new ESP-12E GPIO2
static const uint8_t A0 = 17;
static const uint8_t D0 = 3; static const uint8_t D0 = 3;
static const uint8_t D1 = 1; static const uint8_t D1 = 1;
static const uint8_t D2 = 16; static const uint8_t D2 = 16;
@ -64,24 +51,4 @@ static const uint8_t D13 = 14;
static const uint8_t D14 = 4; static const uint8_t D14 = 4;
static const uint8_t D15 = 5; static const uint8_t D15 = 5;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

37
variants/d1_mini/pins_arduino.h
View File

@ -26,27 +26,14 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 2; static const uint8_t LED_BUILTIN = 2;
static const uint8_t BUILTIN_LED = 2; static const uint8_t BUILTIN_LED = 2;
static const uint8_t A0 = 17;
static const uint8_t D0 = 16; static const uint8_t D0 = 16;
static const uint8_t D1 = 5; static const uint8_t D1 = 5;
static const uint8_t D2 = 4; static const uint8_t D2 = 4;
@ -59,26 +46,4 @@ static const uint8_t D8 = 15;
static const uint8_t RX = 3; static const uint8_t RX = 3;
static const uint8_t TX = 1; static const uint8_t TX = 1;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

35
variants/espino/pins_arduino.h
View File

@ -26,22 +26,11 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 2; static const uint8_t LED_BUILTIN = 2;
static const uint8_t LED_BUILTIN_R = 2; static const uint8_t LED_BUILTIN_R = 2;
static const uint8_t LED_BUILTIN_G = 4; static const uint8_t LED_BUILTIN_G = 4;
@ -53,26 +42,4 @@ static const uint8_t BUILTIN_LEDG = 4;
static const uint8_t BUILTIN_LEDB = 5; static const uint8_t BUILTIN_LEDB = 5;
static const uint8_t BUILTIN_BUTTON = 0; static const uint8_t BUILTIN_BUTTON = 0;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

45
variants/espinotee/pins_arduino.h
View File

@ -1,70 +1,37 @@
/* /*
pins_arduino.h - Pin definition functions for Arduino pins_arduino.h - Pin definition functions for Arduino
Part of Arduino - http://www.arduino.cc/ Part of Arduino - http://www.arduino.cc/
Copyright (c) 2007 David A. Mellis Copyright (c) 2007 David A. Mellis
Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2015. Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2015.
This library is free software; you can redistribute it and/or This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version. version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details. Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA Boston, MA 02111-1307 USA
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
*/ */
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 11
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t BUILTIN_LED = 16; static const uint8_t BUILTIN_LED = 16;
static const uint8_t LED_BUILTIN = 16; static const uint8_t LED_BUILTIN = 16;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

36
variants/espresso_lite_v1/pins_arduino.h
View File

@ -26,46 +26,14 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define ESPRESSO_LITE_VERSION 1 #define ESPRESSO_LITE_VERSION 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 16; static const uint8_t LED_BUILTIN = 16;
static const uint8_t BUILTIN_LED = 16;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

36
variants/espresso_lite_v2/pins_arduino.h
View File

@ -26,46 +26,14 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define ESPRESSO_LITE_VERSION 2 #define ESPRESSO_LITE_VERSION 2
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 2; static const uint8_t LED_BUILTIN = 2;
static const uint8_t BUILTIN_LED = 2;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

67
variants/generic/common.h Normal file
View File

@ -0,0 +1,67 @@
/*
common.h - Commoon pin definition functions for ESP8266 boards
Part of Arduino - http://www.arduino.cc/
Copyright (c) 2007 David A. Mellis
Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2016.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
*/
#ifndef GENERIC_COMMON_H
#define GENERIC_COMMON_H
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
// TODO: this should be <= 9 if flash is in DIO mode
#define isFlashInterfacePin(p) ((p) >= 6 && (p) <= 11)
#define analogInputToDigitalPin(p) ((p > 0) ? NOT_A_PIN : 0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)? (p) : NOT_AN_INTERRUPT)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS && !isFlashInterfacePin(p))? 1 : 0)
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial1
#endif /* GENERIC_COMMON_H */

35
variants/generic/pins_arduino.h
View File

@ -26,45 +26,12 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t BUILTIN_LED = 1; static const uint8_t BUILTIN_LED = 1;
static const uint8_t LED_BUILTIN = 1; static const uint8_t LED_BUILTIN = 1;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

35
variants/nodemcu/pins_arduino.h
View File

@ -26,27 +26,14 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 16; static const uint8_t LED_BUILTIN = 16;
static const uint8_t BUILTIN_LED = 16; static const uint8_t BUILTIN_LED = 16;
static const uint8_t A0 = 17;
static const uint8_t D0 = 16; static const uint8_t D0 = 16;
static const uint8_t D1 = 5; static const uint8_t D1 = 5;
static const uint8_t D2 = 4; static const uint8_t D2 = 4;
@ -59,24 +46,4 @@ static const uint8_t D8 = 15;
static const uint8_t D9 = 3; static const uint8_t D9 = 3;
static const uint8_t D10 = 1; static const uint8_t D10 = 1;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

37
variants/thing/pins_arduino.h
View File

@ -26,47 +26,12 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 2; static const uint8_t SDA = 2;
static const uint8_t SCL = 14; static const uint8_t SCL = 14;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 5; static const uint8_t LED_BUILTIN = 5;
static const uint8_t BUILTIN_LED = 5; static const uint8_t BUILTIN_LED = 5;
static const uint8_t A0 = 17;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */

35
variants/wifinfo/pins_arduino.h
View File

@ -31,27 +31,14 @@
#ifndef Pins_Arduino_h #ifndef Pins_Arduino_h
#define Pins_Arduino_h #define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16 #include "../generic/common.h"
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4; static const uint8_t SDA = 4;
static const uint8_t SCL = 5; static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 12; static const uint8_t LED_BUILTIN = 12;
static const uint8_t BUILTIN_LED = 12; static const uint8_t BUILTIN_LED = 12;
static const uint8_t A0 = 17;
static const uint8_t D0 = 16; static const uint8_t D0 = 16;
static const uint8_t D1 = 5; static const uint8_t D1 = 5;
static const uint8_t D2 = 4; static const uint8_t D2 = 4;
@ -64,24 +51,4 @@ static const uint8_t D8 = 15;
static const uint8_t D9 = 3; static const uint8_t D9 = 3;
static const uint8_t D10 = 1; static const uint8_t D10 = 1;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial1
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */ #endif /* Pins_Arduino_h */