arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-27 18:02:17 +03:00
Code Activity

fix dead link docs (#4221)

Browse Source
This commit is contained in:
Doanh Văn Lương
2018-02-05 10:57:58 +07:00
committed by Develo
parent 29c9ebea32
commit 4e115917ae
16 changed files with 32 additions and 32 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
doc/faq/a01-espcomm_sync-failed.rst
View File

@ -42,7 +42,7 @@ following three things right: 1. Module is provided with enough power,
resistors, 3. Module is put into boot loader mode.
For specific details please refer to section on `Generic ESP8266
modules <../boards.md#generic-esp8266-modules>`__. Example modules
modules <../boards.rst#generic-esp8266-modules>`__. Example modules
without USB to serial converter on board are shown below.
.. figure:: pictures/a01-example-boards-without-usb.png
@ -128,7 +128,7 @@ follows:
``ets Jan 8 2013,rst cause:2, boot mode:(1,7)``
If you see similar message but different values then decode them using
`Boot Messages and Modes <../boards.md#boot-messages-and-modes>`__. The
`Boot Messages and Modes <../boards.rst#boot-messages-and-modes>`__. The
key information is contained in first digit / three right-most bits of
the boot mode message as shown below.
@ -140,9 +140,9 @@ the boot mode message as shown below.
For instance message ``boot mode (3,3)`` indicates that pins GPIO2 and
GPIO0 are set HIGH and GPIO15 is set LOW. This is configuration for
`normal
operation <../boards.md#minimal-hardware-setup-for-running-only>`__ of
operation <../boards.rst#minimal-hardware-setup-for-running-only>`__ of
module (to execute application from flash), not for `boot
loading <../boards.md#minimal-hardware-setup-for-bootloading-only>`__
loading <../boards.rst#minimal-hardware-setup-for-bootloading-only>`__
(flash programming).
Note: Without having this step right you will not be able to upload
@ -391,4 +391,4 @@ Test stand used for checking of ck reset method is shown above.
No any ESP module has been harmed during preparation of this FAQ item.
`FAQ list :back: <readme.md>`__
`FAQ list :back: <readme.rst>`__