diff --git a/build/windows/dist/drivers/Arduino Due Programming Port.inf b/build/windows/dist/drivers/Arduino Due Programming Port.inf deleted file mode 100644 index 16200c626..000000000 --- a/build/windows/dist/drivers/Arduino Due Programming Port.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003D - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003D - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="CDC_vista" -DRIVERFILENAME ="usbser" -MFGNAME="Arduino LLC (www.arduino.cc)" -INSTDISK="Arduino Due Programming Port Driver Installer" -DESCRIPTION="Arduino Due Programming Port" -SERVICE="USB RS-232 Emulation Driver" diff --git a/build/windows/dist/drivers/Arduino Due.inf b/build/windows/dist/drivers/Arduino Due.inf deleted file mode 100644 index 9b70ceae3..000000000 --- a/build/windows/dist/drivers/Arduino Due.inf +++ /dev/null @@ -1,105 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003E&MI_00 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_003E&MI_00 - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="CDC_vista" -DRIVERFILENAME ="usbser" -MFGNAME="Arduino LLC (www.arduino.cc)" -INSTDISK="Arduino Due Driver Installer" -DESCRIPTION="Arduino Due" -SERVICE="USB RS-232 Emulation Driver" diff --git a/build/windows/dist/drivers/Old_Arduino_Drivers.zip b/build/windows/dist/drivers/Old_Arduino_Drivers.zip index 080daea03..7ba751fc6 100644 Binary files a/build/windows/dist/drivers/Old_Arduino_Drivers.zip and b/build/windows/dist/drivers/Old_Arduino_Drivers.zip differ diff --git a/build/windows/dist/drivers/bossa.inf b/build/windows/dist/drivers/bossa.inf deleted file mode 100755 index 1722074f3..000000000 --- a/build/windows/dist/drivers/bossa.inf +++ /dev/null @@ -1,48 +0,0 @@ -[Version] ; Version section -Signature="$Chicago$" ; All Windows versions -Class=Ports ; This is a serial port driver -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} ; Associated GUID -Provider=%SHUMATECH% ; Driver is provided by SHUMATECH -DriverVer=05/18/2011,1.0 ; Driver version - -[DestinationDirs] ; DestinationDirs section -DefaultDestDir=12 ; Default install directory is \drivers or \IOSubSys - -[Manufacturer] ; Manufacturer section -%SHUMATECH%=ShumaTech,NTamd64 ; Only one manufacturer (SHUMATECH), models section is named - ; ShumaTech - -[ShumaTech] ; Models section corresponding to SHUMATECH -%BOSSA%=BOSSA.Install,USB\VID_03EB&PID_6124 ; Identifies a device with Vendor ID (03EBh) and - ; Product ID equal to 6124h. Corresponding Install section - ; is named BOSSA.Install - -[ShumaTech.NTamd64] ; Models section corresponding to SHUMATECH -%BOSSA%=BOSSA.Install,USB\VID_03EB&PID_6124 ; Identifies a device with Vendor ID (03EBh) and - ; Product ID equal to 6124h. Corresponding Install section - ; is named BOSSA.Install - -[BOSSA.Install] ; Install section -include=mdmcpq.inf -CopyFiles=FakeModemCopyFileSection -AddReg=BOSSA.AddReg ; Registry keys to add are listed in BOSSA.AddReg - -[BOSSA.AddReg] ; AddReg section -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,usbser.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[BOSSA.Install.Services] ; Services section -AddService=usbser,0x00000002,BOSSA.AddService ; Assign usbser as the PnP driver for the device - -[BOSSA.AddService] ; Service install section -DisplayName=%USBSer% ; Name of the serial driver -ServiceType=1 ; Service kernel driver -StartType=3 ; Driver is started by the PnP manager -ErrorControl=1 ; Warn about errors -ServiceBinary=%12%\usbser.sys ; Driver filename - -[Strings] ; Strings section -SHUMATECH="ShumaTech" ; String value for the SHUMATECH symbol -BOSSA="BOSSA Program Port" ; String value for the BOSSA symbol -USBSer="USB Serial Driver" ; String value for the USBSer symbol