Merge of arduino-1.0.1. Work in progress...

build/create_reference.pl

@@ -34,6 +34,7 @@ my $wire = create_page('Wire.html', "$ARDUINO/Reference/Wire");
 my $sd = create_page('SD.html', "$ARDUINO/Reference/SD");
 my $servo = create_page('Servo.html', "$ARDUINO/Reference/Servo");
 my $spi = create_page('SPI.html', "$ARDUINO/Reference/SPI");
+my $mousekeyboard = create_page('MouseKeyboard.html', "$ARDUINO/Reference/MouseKeyboard");
 my $lcd = create_page('LiquidCrystal.html', "$ARDUINO/Reference/LiquidCrystal");
 my $ethernet = create_page('Ethernet.html', "$ARDUINO/Reference/Ethernet");
 my $serial = create_page('Serial.html', "$ARDUINO/Reference/Serial");
@@ -48,6 +49,8 @@ create_linked_pages($servo, qr!$ARDUINO/Reference/(Servo\w+)!,        '%%.html')
 create_linked_pages($sd, qr!$ARDUINO/Reference/(SD\w+)!,        '%%.html');
 create_linked_pages($sd, qr!$ARDUINO/Reference/(File\w+)!,        '%%.html');
 create_linked_pages($spi, qr!$ARDUINO/Reference/(SPI\w+)!,        '%%.html');
+create_linked_pages($mousekeyboard, qr!$ARDUINO/Reference/(Mouse\w+)!,        '%%.html');
+create_linked_pages($mousekeyboard, qr!$ARDUINO/Reference/(Keyboard\w+)!,        '%%.html');
 create_linked_pages($lcd, qr!$ARDUINO/Reference/(LiquidCrystal\w+)!,        '%%.html');
 create_linked_pages($ethernet, qr!$ARDUINO/Reference/(Ethernet\w+)!,        '%%.html');
 create_linked_pages($ethernet, qr!$ARDUINO/Reference/(Server\w+)!,        '%%.html');

build/shared/examples/01.Basics/AnalogReadSerial/AnalogReadSerial.ino

@@ -18,4 +18,5 @@ void loop() {
   int sensorValue = analogRead(A0);
   // print out the value you read:
   Serial.println(sensorValue);
+  delay(1);        // delay in between reads for stability
 }

build/shared/examples/01.Basics/DigitalReadSerial/DigitalReadSerial.ino

@@ -22,6 +22,7 @@ void loop() {
   int buttonState = digitalRead(pushButton);
   // print out the state of the button:
   Serial.println(buttonState);
+  delay(1);        // delay in between reads for stability
 }
 
 

build/shared/examples/02.Digital/toneKeyboard/toneKeyboard.ino

@@ -9,7 +9,7 @@
  * 8-ohm speaker on digital pin 8
  
  created 21 Jan 2010
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe 
 
 This example code is in the public domain.
@@ -41,5 +41,4 @@ void loop() {
       tone(8, notes[thisSensor], 20);
     } 
   }
-  Serial.println();
 }

build/shared/examples/02.Digital/tonePitchFollower/tonePitchFollower.ino

@@ -9,7 +9,7 @@
  * 4.7K resistor on analog 0 to ground
  
  created 21 Jan 2010
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe 
 
 This example code is in the public domain.
@@ -36,7 +36,7 @@ void loop() {
 
   // play the pitch:
   tone(9, thisPitch, 10);
-
+  delay(1);        // delay in between reads for stability
 }
 
 

build/shared/examples/03.Analog/AnalogInOutSerial/AnalogInOutSerial.ino

@@ -12,7 +12,7 @@
  * LED connected from digital pin 9 to ground
  
  created 29 Dec. 2008
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe
  
  This example code is in the public domain.
@@ -46,8 +46,8 @@ void loop() {
   Serial.print("\t output = ");      
   Serial.println(outputValue);   
 
-  // wait 10 milliseconds before the next loop
+  // wait 2 milliseconds before the next loop
   // for the analog-to-digital converter to settle
   // after the last reading:
-  delay(10);                     
+  delay(2);                     
 }

build/shared/examples/03.Analog/Smoothing/Smoothing.ino

@@ -10,9 +10,9 @@
     * Analog sensor (potentiometer will do) attached to analog input 0
 
   Created 22 April 2007
-  modified 30 Aug 2011
   By David A. Mellis  <dam@mellis.org>
-
+  modified 9 Apr 2012
+  by Tom Igoe
   http://www.arduino.cc/en/Tutorial/Smoothing
   
   This example code is in the public domain.
@@ -61,7 +61,8 @@ void loop() {
   // calculate the average:
   average = total / numReadings;         
   // send it to the computer as ASCII digits
-  Serial.println(average);               
+  Serial.println(average);   
+  delay(1);        // delay in between reads for stability            
 }
 
 

build/shared/examples/04.Communication/ASCIITable/ASCIITable.ino

@@ -11,7 +11,7 @@
  
  created 2006
  by Nicholas Zambetti 
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe
  
  This example code is in the public domain.
@@ -19,10 +19,13 @@
  <http://www.zambetti.com> 
  
  */
-void setup() 
-{ 
+void setup() { 
+ //Initialize serial and wait for port to open:
   Serial.begin(9600); 
-
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  
   // prints title with ending line break 
   Serial.println("ASCII Table ~ Character Map"); 
 } 
@@ -33,8 +36,7 @@ int thisByte = 33;
 // for example. '!' is the same as 33, so you could also use this:
 //int thisByte = '!';  
 
-void loop() 
-{ 
+void loop() { 
   // prints value unaltered, i.e. the raw binary version of the 
   // byte. The serial monitor interprets all bytes as 
   // ASCII, so 33, the first number,  will show up as '!' 

build/shared/examples/04.Communication/Graph/Graph.ino

@@ -18,7 +18,7 @@
   
  created 2006
  by David A. Mellis
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe and Scott Fitzgerald
  
  This example code is in the public domain.
@@ -36,7 +36,7 @@ void loop() {
   Serial.println(analogRead(A0));
   // wait a bit for the analog-to-digital converter 
   // to stabilize after the last reading:
-  delay(10);
+  delay(2);
 }
 
 /* Processing code for this example

build/shared/examples/04.Communication/MultiSerialMega/MultiSerialMega.ino

@@ -11,7 +11,8 @@
  * Serial monitor open on Serial port 0:
  
  created 30 Dec. 2008
- by Tom Igoe
+ modified 20 May 2012
+ by Tom Igoe & Jed Roach
  
  This example code is in the public domain.
  
@@ -30,4 +31,10 @@ void loop() {
     int inByte = Serial1.read();
     Serial.write(inByte); 
   }
+  
+  // read from port 0, send to port 1:
+  if (Serial.available()) {
+    int inByte = Serial.read();
+    Serial1.write(inByte); 
+  }
 }

build/shared/examples/04.Communication/ReadASCIIString/ReadASCIIString.ino

@@ -0,0 +1,74 @@
+/*
+  Reading a serial ASCII-encoded string.
+ 
+ This sketch demonstrates the Serial parseInt() function.
+ It looks for an ASCII string of comma-separated values.
+ It parses them into ints, and uses those to fade an RGB LED.
+ 
+ Circuit: Common-anode RGB LED wired like so:
+ * Red cathode: digital pin 3
+ * Green cathode: digital pin 5
+ * blue cathode: digital pin 6
+ * anode: +5V
+ 
+ created 13 Apr 2012
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+ */
+
+// pins for the LEDs:
+const int redPin = 3;
+const int greenPin = 5;
+const int bluePin = 6;
+
+void setup() {
+  // initialize serial:
+  Serial.begin(9600);
+  // make the pins outputs:
+  pinMode(redPin, OUTPUT); 
+  pinMode(greenPin, OUTPUT); 
+  pinMode(bluePin, OUTPUT); 
+
+}
+
+void loop() {
+  // if there's any serial available, read it:
+  while (Serial.available() > 0) {
+
+    // look for the next valid integer in the incoming serial stream:
+    int red = Serial.parseInt(); 
+    // do it again:
+    int green = Serial.parseInt(); 
+    // do it again:
+    int blue = Serial.parseInt(); 
+
+    // look for the newline. That's the end of your
+    // sentence:
+    if (Serial.read() == '\n') {
+      // constrain the values to 0 - 255 and invert
+      // if you're using a common-cathode LED, just use "constrain(color, 0, 255);"
+      red = 255 - constrain(red, 0, 255);
+      green = 255 - constrain(green, 0, 255);
+      blue = 255 - constrain(blue, 0, 255);
+
+      // fade the red, green, and blue legs of the LED: 
+      analogWrite(redPin, red);
+      analogWrite(greenPin, green);
+      analogWrite(bluePin, blue);
+
+      // print the three numbers in one string as hexadecimal:
+      Serial.print(red, HEX);
+      Serial.print(green, HEX);
+      Serial.println(blue, HEX);
+    }
+  }
+}
+
+
+
+
+
+
+
+

build/shared/examples/04.Communication/SerialCallResponse/SerialCallResponse.ino

@@ -33,6 +33,10 @@ void setup()
 {
   // start serial port at 9600 bps:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
   pinMode(2, INPUT);   // digital sensor is on digital pin 2
   establishContact();  // send a byte to establish contact until receiver responds 
 }

build/shared/examples/04.Communication/SerialCallResponseASCII/SerialCallResponseASCII.ino

@@ -35,8 +35,13 @@ int inByte = 0;         // incoming serial byte
 
 void setup()
 {
-  // start serial port at 9600 bps:
+  // start serial port at 9600 bps and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  
   pinMode(2, INPUT);   // digital sensor is on digital pin 2
   establishContact();  // send a byte to establish contact until receiver responds 
 }

build/shared/examples/05.Control/IfStatementConditional/IfStatementConditional.ino

@@ -16,7 +16,7 @@
  connected to pin 13, so you don't need any extra components for this example.
  
  created 17 Jan 2009
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe
 
 This example code is in the public domain.
@@ -51,6 +51,6 @@ void loop() {
 
   // print the analog value:
   Serial.println(analogValue);
-
+  delay(1);        // delay in between reads for stability
 }
 

build/shared/examples/05.Control/switchCase/switchCase.ino

@@ -14,7 +14,7 @@
  * 10K resistor from analog in 0 to ground
  
  created 1 Jul 2009
- modified 30 Aug 2011
+ modified 9 Apr 2012
  by Tom Igoe 
  
  This example code is in the public domain.
@@ -22,7 +22,8 @@
  http://www.arduino.cc/en/Tutorial/SwitchCase
  */
 
-// these constants won't change:
+// these constants won't change. They are the
+// lowest and highest readings you get from your sensor:
 const int sensorMin = 0;      // sensor minimum, discovered through experiment
 const int sensorMax = 600;    // sensor maximum, discovered through experiment
 
@@ -53,7 +54,7 @@ void loop() {
     Serial.println("bright");
     break;
   } 
-
+  delay(1);        // delay in between reads for stability
 }
 
 

build/shared/examples/07.Display/RowColumnScanning/RowColumnScanning.ino

@@ -50,9 +50,7 @@ int x = 5;
 int y = 5;
 
 void setup() {
-  Serial.begin(9600);
-  // initialize the I/O pins as outputs:
-
+  // initialize the I/O pins as outputs
   // iterate over the pins:
   for (int thisPin = 0; thisPin < 8; thisPin++) {
     // initialize the output pins:

build/shared/examples/08.Strings/CharacterAnalysis/CharacterAnalysis.ino

@@ -5,14 +5,18 @@
  Send any byte and the sketch will tell you about it.
  
  created 29 Nov 2010
+ modified 2 Apr 2012
  by Tom Igoe
  
  This example code is in the public domain.
  */
 
 void setup() {
-  // Open serial communications:
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
 
   // send an intro:
   Serial.println("send any byte and I'll tell you everything I can about it");
@@ -77,9 +81,3 @@ void loop() {
     Serial.println();
   }
 }
-
-
-
-
-
-

build/shared/examples/08.Strings/StringAdditionOperator/StringAdditionOperator.ino

@@ -5,7 +5,7 @@
  You can also add several different data types to string, as shown here:
  
  created 27 July 2010
- modified 30 Aug 2011
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringAdditionOperator
@@ -17,11 +17,18 @@
 String stringOne, stringTwo, stringThree;
 
 void setup() {
+  // initialize serial and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
   stringOne = String("stringThree = ");
   stringTwo = String("this string");
   stringThree = String ();
+  // send an intro:
   Serial.println("\n\nAdding strings together (concatenation):");
+  Serial.println();
 }
 
 void loop() {
@@ -58,4 +65,4 @@ void loop() {
 
   // do nothing while true:
   while(true);
-}
+}

build/shared/examples/08.Strings/StringAppendOperator/StringAppendOperator.ino

@@ -4,7 +4,7 @@
  Examples of how to append different data types to strings
  
  created 27 July 2010
- modified 30 Aug 2011
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringAppendOperator
@@ -14,10 +14,17 @@
 String stringOne, stringTwo;
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
   stringOne = String("Sensor ");
   stringTwo = String("value");
+  // send an intro:
   Serial.println("\n\nAppending to a string:");
+  Serial.println();
 }
 
 void loop() {
@@ -61,4 +68,5 @@ void loop() {
 
   // do nothing while true:
   while(true);
-}
+}
+

build/shared/examples/08.Strings/StringCaseChanges/StringCaseChanges.ino

@@ -4,6 +4,7 @@
  Examples of how to change the case of a string
  
  created 27 July 2010
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringCaseChanges
@@ -12,24 +13,31 @@
  */
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
   Serial.println("\n\nString  case changes:");
+  Serial.println();
 }
 
 void loop() {
   // toUpperCase() changes all letters to upper case:
   String stringOne = "<html><head><body>";
   Serial.println(stringOne);
-  stringOne = (stringOne.toUpperCase());
+  stringOne.toUpperCase();
   Serial.println(stringOne);
-  
- // toLowerCase() changes all letters to lower case:  
+
+  // toLowerCase() changes all letters to lower case:  
   String stringTwo = "</BODY></HTML>";
   Serial.println(stringTwo);
-  stringTwo = stringTwo.toLowerCase();
+  stringTwo.toLowerCase();
   Serial.println(stringTwo);
-  
-  
+
+
   // do nothing while true:
   while(true);
 }

build/shared/examples/08.Strings/StringCharacters/StringCharacters.ino

@@ -4,6 +4,7 @@
  Examples of how to get and set characters of a String
  
  created 27 July 2010
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringCharacters
@@ -12,7 +13,12 @@
  */
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
   Serial.println("\n\nString  charAt() and setCharAt():");
 }
 
@@ -20,18 +26,19 @@ void loop() {
   // make a string to report a sensor reading:
   String reportString = "SensorReading: 456";
   Serial.println(reportString);
-  
+
   // the reading's most significant digit is at position 15 in the reportString:
-  String mostSignificantDigit = reportString.charAt(15);
+  char mostSignificantDigit = reportString.charAt(15);
   Serial.println("Most significant digit of the sensor reading is: " + mostSignificantDigit);
 
-// add blank space:
+  // add blank space:
   Serial.println();
-  
+
   // you can alo set the character of a string. Change the : to a = character
   reportString.setCharAt(13, '='); 
   Serial.println(reportString);
 
   // do nothing while true:
   while(true);
-}
+}
+

build/shared/examples/08.Strings/StringComparisonOperators/StringComparisonOperators.ino

@@ -4,21 +4,29 @@
  Examples of how to compare strings using the comparison operators
  
  created 27 July 2010
- modified 30 Aug 2011
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringComparisonOperators
  
  This example code is in the public domain.
  */
- 
+
 String stringOne, stringTwo;
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   stringOne = String("this");
   stringTwo = String("that");
+  // send an intro:
   Serial.println("\n\nComparing Strings:");
+  Serial.println();
 
 }
 
@@ -57,7 +65,7 @@ void loop() {
   // a numeric string compared to the number it represents:
   stringOne = "1";
   int numberOne = 1;
-  if (stringOne == numberOne) {
+  if (stringOne.toInt() == numberOne) {
     Serial.println(stringOne + " = " + numberOne);
   }
 
@@ -121,4 +129,4 @@ void loop() {
 
     }
   }
-}
+}

build/shared/examples/08.Strings/StringConstructors/StringConstructors.ino

@@ -0,0 +1,72 @@
+/*
+   String constructors
+ 
+ Examples of how  to create strings from other data types
+ 
+ created 27 July 2010
+ modified 30 Aug 2011
+ by Tom Igoe
+ 
+ http://arduino.cc/en/Tutorial/StringConstructors
+ 
+ This example code is in the public domain.
+ */
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  
+  // send an intro:
+  Serial.println("\n\nString Constructors:");
+  Serial.println();
+}
+
+void loop() {
+  // using a constant String:
+  String stringOne = "Hello String";     
+  Serial.println(stringOne);      // prints "Hello String"
+
+  // converting a constant char into a String:
+  stringOne =  String('a');        
+  Serial.println(stringOne);       // prints "a"
+
+  // converting a constant string into a String object:
+  String stringTwo =  String("This is a string");  
+  Serial.println(stringTwo);      // prints "This is a string"
+
+  // concatenating two strings:
+  stringOne =  String(stringTwo + " with more"); 
+  // prints "This is a string with more":
+  Serial.println(stringOne);      
+
+  // using a constant integer:
+  stringOne =  String(13);        
+  Serial.println(stringOne);      // prints "13"
+
+  // using an int and a base:
+  stringOne =  String(analogRead(A0), DEC);  
+  // prints "453" or whatever the value of analogRead(A0) is
+  Serial.println(stringOne);      
+
+  // using an int and a base (hexadecimal):
+  stringOne =  String(45, HEX);   
+  // prints "2d", which is the hexadecimal version of decimal 45:
+  Serial.println(stringOne);      
+
+  // using an int and a base (binary)
+  stringOne =  String(255, BIN);  
+  // prints "11111111" which is the binary value of 255
+  Serial.println(stringOne);      
+
+  // using a long and a base:
+  stringOne =  String(millis(), DEC);
+  // prints "123456" or whatever the value of millis() is: 
+  Serial.println(stringOne);      
+
+  // do nothing while true:
+  while(true);
+
+}

build/shared/examples/08.Strings/StringIndexOf/StringIndexOf.ino

@@ -4,6 +4,7 @@
  Examples of how to evaluate, look for, and replace characters in a String
  
  created 27 July 2010
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringIndexOf
@@ -12,13 +13,19 @@
  */
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
-  Serial.println("\n\nString indexOf() and lastIndexOf()  functions:");
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
 
+  // send an intro:
+  Serial.println("\n\nString indexOf() and lastIndexOf()  functions:");
+  Serial.println();
 }
 
 void loop() {
- // indexOf() returns the position (i.e. index) of a particular character
+  // indexOf() returns the position (i.e. index) of a particular character
   // in a string. For example, if you were parsing HTML tags, you could use it:
   String stringOne = "<HTML><HEAD><BODY>";
   int firstClosingBracket = stringOne.indexOf('>');
@@ -47,12 +54,13 @@ void loop() {
   Serial.println("The index of the last list item in the string " + stringOne + " is " + lastListItem);
 
 
-// lastIndexOf() can also search for a string:
-   stringOne = "<p>Lorem ipsum dolor sit amet</p><p>Ipsem</p><p>Quod</p>";
+  // lastIndexOf() can also search for a string:
+  stringOne = "<p>Lorem ipsum dolor sit amet</p><p>Ipsem</p><p>Quod</p>";
   int lastParagraph = stringOne.lastIndexOf("<p");
   int secondLastGraf = stringOne.lastIndexOf("<p", lastParagraph - 1);
   Serial.println("The index of the second last paragraph tag " + stringOne + " is " + secondLastGraf);
 
-// do nothing while true:
- while(true);
-}
+  // do nothing while true:
+  while(true);
+}
+

build/shared/examples/08.Strings/StringLength/StringLength.ino

@@ -15,8 +15,15 @@ String txtMsg = "";                         // a string for incoming text
 int lastStringLength = txtMsg.length();     // previous length of the String
 
 void setup() {
-  // open the serial port:
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
+  Serial.println("\n\nString  length():");
+  Serial.ptintln();
 }
 
 void loop() {
@@ -40,4 +47,4 @@ void loop() {
     // note the length for next time through the loop:
     lastStringLength = txtMsg.length();
   }
-}
+}

build/shared/examples/08.Strings/StringLengthTrim/StringLengthTrim.ino

@@ -4,6 +4,7 @@
  Examples of how to use length() and trim() in a String
  
  created 27 July 2010
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringLengthTrim
@@ -12,8 +13,15 @@
  */
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
   Serial.println("\n\nString  length() and trim():");
+  Serial.println();
 }
 
 void loop() {
@@ -24,7 +32,7 @@ void loop() {
   Serial.println(stringOne.length());
 
   // trim the white space off the string:
-  stringOne = stringOne.trim();
+  stringOne.trim();
   Serial.print(stringOne);
   Serial.print("<--- end of trimmed string. Length: ");
   Serial.println(stringOne.length());

build/shared/examples/08.Strings/StringReplace/StringReplace.ino

@@ -0,0 +1,50 @@
+/*
+  String replace()
+ 
+ Examples of how to replace characters or substrings of a string
+ 
+ created 27 July 2010
+ modified 2 Apr 2012
+ by Tom Igoe
+ 
+ http://arduino.cc/en/Tutorial/StringReplace
+ 
+ This example code is in the public domain. 
+ */
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
+  Serial.println("\n\nString  replace:\n");
+  Serial.println();
+}
+
+void loop() {
+  String stringOne = "<html><head><body>";
+  Serial.println(stringOne);
+  // replace() changes all instances of one substring with another:
+  // first, make a copy of th original string:
+  String stringTwo = stringOne;
+  // then perform the replacements:
+  stringTwo.replace("<", "</");
+  // print the original:
+  Serial.println("Original string: " + stringOne);
+  // and print the modified string:
+  Serial.println("Modified string: " + stringTwo);
+
+  // you can also use replace() on single characters:
+  String normalString = "bookkeeper";
+  Serial.println("normal: " + normalString);
+  String leetString = normalString;
+  leetString.replace('o', '0');
+  leetString.replace('e', '3');
+  Serial.println("l33tspeak: " + leetString);
+
+  // do nothing while true:
+  while(true);
+}

build/shared/examples/08.Strings/StringStartsWithEndsWith/StringStartsWithEndsWith.ino

@@ -4,7 +4,7 @@
  Examples of how to use startsWith() and endsWith() in a String
  
  created 27 July 2010
- modified 30 Aug 2011
+ modified 2 Apr 2012
  by Tom Igoe
  
  http://arduino.cc/en/Tutorial/StringStartsWithEndsWith
@@ -13,25 +13,31 @@
  */
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
-  Serial.println("\n\nString startsWith() and endsWith():");
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
 
+  // send an intro:
+  Serial.println("\n\nString startsWith() and endsWith():");
+  Serial.println();
 }
 
 void loop() {
-// startsWith() checks to see if a String starts with a particular substring:
-    String stringOne = "HTTP/1.1 200 OK";
-    Serial.println(stringOne);
+  // startsWith() checks to see if a String starts with a particular substring:
+  String stringOne = "HTTP/1.1 200 OK";
+  Serial.println(stringOne);
   if (stringOne.startsWith("HTTP/1.1")) {
     Serial.println("Server's using http version 1.1"); 
   } 
-  
+
   // you can also look for startsWith() at an offset position in the string:
-     stringOne = "HTTP/1.1 200 OK";
+  stringOne = "HTTP/1.1 200 OK";
   if (stringOne.startsWith("200 OK", 9)) {
     Serial.println("Got an OK from the server"); 
   } 
-  
+
   // endsWith() checks to see if a String ends with a particular character:
   String sensorReading = "sensor = ";
   sensorReading += analogRead(A0);
@@ -44,6 +50,6 @@ void loop() {
 
   }
 
-// do nothing while true:
- while(true);
-}
+  // do nothing while true:
+  while(true);
+}

build/shared/examples/08.Strings/StringSubstring/StringSubstring.ino

@@ -3,8 +3,9 @@
  
  Examples of how to use substring in a String
  
- created 27 July 2010
- by Tom Igoe
+ created 27 July 2010, 
+ modified 2 Apr 2012
+ by Zach Eveland
  
  http://arduino.cc/en/Tutorial/StringSubstring
  
@@ -12,15 +13,22 @@
  */
 
 void setup() {
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
   Serial.println("\n\nString  substring():");
+  Serial.println();
 }
 
 void loop() {
   // Set up a String:
   String stringOne = "Content-Type: text/html";
   Serial.println(stringOne);
-  
+
   // substring(index) looks for the substring from the index position to the end:
   if (stringOne.substring(19) == "html") {
     Serial.println("It's an html file"); 
@@ -32,4 +40,4 @@ void loop() {
 
   // do nothing while true:
   while(true);
-}
+}

build/shared/examples/08.Strings/StringToInt/StringToInt.ino

@@ -16,8 +16,15 @@
 String inString = "";    // string to hold input
 
 void setup() {
-  // Initialize serial communications:
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
+  Serial.println("\n\nString toInt():");
+  Serial.println();
 }
 
 void loop() {
@@ -42,6 +49,3 @@ void loop() {
   }
 }
 
-
-
-

build/shared/examples/08.Strings/StringToIntRGB/StringToIntRGB.ino

@@ -0,0 +1,235 @@
+/*
+  Serial RGB controller
+ 
+ Reads a serial input string looking for three comma-separated
+ integers with a newline at the end. Values should be between 
+ 0 and 255. The sketch uses those values to set the color 
+ of an RGB LED attached to pins 9 - 11.
+ 
+ The circuit:
+ * Common-anode RGB LED cathodes attached to pins 9 - 11
+ * LED anode connected to pin 13
+ 
+ To turn on any given channel, set the pin LOW.  
+ To turn off, set the pin HIGH. The higher the analogWrite level,
+ the lower the brightness.
+ 
+ created 29 Nov 2010
+ by Tom Igoe
+ 
+ This example code is in the public domain. 
+ */
+
+String inString = "";    // string to hold input
+int currentColor = 0;
+int red, green, blue = 0;
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+  // send an intro:
+  Serial.println("\n\nString toInt() RGB:");
+  Serial.println();
+  // set LED cathode pins as outputs:
+  pinMode(9, OUTPUT);
+  pinMode(10, OUTPUT);
+  pinMode(11, OUTPUT);
+  // turn on pin 13 to power the LEDs:
+  pinMode(13, OUTPUT);
+  digitalWrite(13, HIGH);
+}
+
+void loop() {
+  int inChar;
+
+  // Read serial input:
+  if (Serial.available() > 0) {
+    inChar = Serial.read();
+  }
+
+  if (isDigit(inChar)) {
+    // convert the incoming byte to a char 
+    // and add it to the string:
+    inString += (char)inChar; 
+  }
+
+  // if you get a comma, convert to a number,
+  // set the appropriate color, and increment
+  // the color counter:
+  if (inChar == ',') {
+    // do something different for each value of currentColor:
+    switch (currentColor) {
+    case 0:    // 0 = red
+      red = inString.toInt();
+      // clear the string for new input:
+      inString = ""; 
+      break;
+    case 1:    // 1 = green:
+      green = inString.toInt();
+      // clear the string for new input:
+      inString = ""; 
+      break;
+    }
+    currentColor++;
+  }
+  // if you get a newline, you know you've got
+  // the last color, i.e. blue:
+  if (inChar == '\n') {
+    blue = inString.toInt();
+
+    // set the levels of the LED.
+    // subtract value from 255 because a higher
+    // analogWrite level means a dimmer LED, since
+    // you're raising the level on the anode:
+    analogWrite(11,  255 - red);
+    analogWrite(9, 255 - green);
+    analogWrite(10, 255 - blue);
+
+    // print the colors:
+    Serial.print("Red: ");
+    Serial.print(red);
+    Serial.print(", Green: ");
+    Serial.print(green);
+    Serial.print(", Blue: ");
+    Serial.println(blue);
+
+    // clear the string for new input:
+    inString = ""; 
+    // reset the color counter:
+    currentColor = 0;
+  }
+
+}
+
+
+/*
+Here's a Processing sketch that will draw a color wheel and send a serial
+ string with the color you click on:
+ 
+ // Subtractive Color Wheel with Serial
+ // Based on a Processing example by Ira Greenberg. 
+ // Serial output added by Tom Igoe
+ // 
+ // The primaries are red, yellow, and blue. The secondaries are green, 
+ // purple, and orange. The tertiaries are  yellow-orange, red-orange, 
+ // red-purple, blue-purple, blue-green, and yellow-green.
+ // 
+ // Create a shade or tint of the subtractive color wheel using
+ // SHADE or TINT parameters.
+ 
+ // Updated 29 November 2010.
+ 
+ 
+ 
+ import processing.serial.*;
+ 
+ int segs = 12;
+ int steps = 6;
+ float rotAdjust = TWO_PI / segs / 2;
+ float radius;
+ float segWidth;
+ float interval = TWO_PI / segs;
+ 
+ Serial myPort;
+ 
+ void setup() {
+ size(200, 200);
+ background(127);
+ smooth();
+ ellipseMode(RADIUS);
+ noStroke();
+ // make the diameter 90% of the sketch area
+ radius = min(width, height) * 0.45;
+ segWidth = radius / steps;
+ 
+ // swap which line is commented out to draw the other version
+ // drawTintWheel();
+ drawShadeWheel();
+ // open the first serial port in your computer's list
+ myPort = new Serial(this, Serial.list()[0], 9600);
+ }
+ 
+ 
+ void drawShadeWheel() {
+ for (int j = 0; j < steps; j++) {
+ color[] cols = { 
+ color(255-(255/steps)*j, 255-(255/steps)*j, 0), 
+ color(255-(255/steps)*j, (255/1.5)-((255/1.5)/steps)*j, 0), 
+ color(255-(255/steps)*j, (255/2)-((255/2)/steps)*j, 0), 
+ color(255-(255/steps)*j, (255/2.5)-((255/2.5)/steps)*j, 0), 
+ color(255-(255/steps)*j, 0, 0), 
+ color(255-(255/steps)*j, 0, (255/2)-((255/2)/steps)*j), 
+ color(255-(255/steps)*j, 0, 255-(255/steps)*j), 
+ color((255/2)-((255/2)/steps)*j, 0, 255-(255/steps)*j), 
+ color(0, 0, 255-(255/steps)*j),
+ color(0, 255-(255/steps)*j, (255/2.5)-((255/2.5)/steps)*j), 
+ color(0, 255-(255/steps)*j, 0), 
+ color((255/2)-((255/2)/steps)*j, 255-(255/steps)*j, 0)
+ };
+ for (int i = 0; i < segs; i++) {
+ fill(cols[i]);
+ arc(width/2, height/2, radius, radius, 
+ interval*i+rotAdjust, interval*(i+1)+rotAdjust);
+ }
+ radius -= segWidth;
+ }
+ }
+ 
+ 
+ void drawTintWheel() {
+ for (int j = 0; j < steps; j++) {
+ color[] cols = { 
+ color((255/steps)*j, (255/steps)*j, 0), 
+ color((255/steps)*j, ((255/1.5)/steps)*j, 0), 
+ color((255/steps)*j, ((255/2)/steps)*j, 0), 
+ color((255/steps)*j, ((255/2.5)/steps)*j, 0), 
+ color((255/steps)*j, 0, 0), 
+ color((255/steps)*j, 0, ((255/2)/steps)*j), 
+ color((255/steps)*j, 0, (255/steps)*j), 
+ color(((255/2)/steps)*j, 0, (255/steps)*j), 
+ color(0, 0, (255/steps)*j),
+ color(0, (255/steps)*j, ((255/2.5)/steps)*j), 
+ color(0, (255/steps)*j, 0), 
+ color(((255/2)/steps)*j, (255/steps)*j, 0)
+ };
+ for (int i = 0; i < segs; i++) {
+ fill(cols[i]);
+ arc(width/2, height/2, radius, radius, 
+ interval*i+rotAdjust, interval*(i+1)+rotAdjust);
+ }
+ radius -= segWidth;
+ }
+ }
+ 
+ void draw() {
+ // nothing happens here
+ }
+ 
+ void mouseReleased() {
+ // get the color of the mouse position's pixel:
+ color targetColor = get(mouseX, mouseY);
+ // get the component values:
+ int r = int(red(targetColor));
+ int g = int(green(targetColor));
+ int b = int(blue(targetColor));
+ // make a comma-separated string:
+ String colorString = r + "," + g + "," + b + "\n";
+ // send it out the serial port:
+ myPort.write(colorString );
+ }
+ 
+*/
+
+
+
+
+
+
+
+
+
+

build/shared/examples/8.Strings/StringConstructors/StringConstructors.ino

@@ -1,64 +0,0 @@
-/*
-   String constructors
- 
- Examples of how  to create strings from other data types
- 
- created 27 July 2010
- modified 30 Aug 2011
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/StringConstructors
- 
- This example code is in the public domain.
- */
-
-void setup() {
-  Serial.begin(9600);
-}
-
-void loop() {
-    // using a constant String:
-    String stringOne = "Hello String";     
-    Serial.println(stringOne);      // prints "Hello String"
-
-    // converting a constant char into a String:
-    stringOne =  String('a');        
-    Serial.println(stringOne);       // prints "a"
-
-    // converting a constant string into a String object:
-    String stringTwo =  String("This is a string");  
-    Serial.println(stringTwo);      // prints "This is a string"
-
-    // concatenating two strings:
-    stringOne =  String(stringTwo + " with more"); 
-    // prints "This is a string with more":
-    Serial.println(stringOne);      
-
-    // using a constant integer:
-    stringOne =  String(13);        
-    Serial.println(stringOne);      // prints "13"
-    
-    // using an int and a base:
-    stringOne =  String(analogRead(A0), DEC);  
-    // prints "453" or whatever the value of analogRead(A0) is
-    Serial.println(stringOne);      
-
-    // using an int and a base (hexadecimal):
-    stringOne =  String(45, HEX);   
-    // prints "2d", which is the hexadecimal version of decimal 45:
-    Serial.println(stringOne);      
-
-	// using an int and a base (binary)
-    stringOne =  String(255, BIN);  
-    // prints "11111111" which is the binary value of 255
-    Serial.println(stringOne);      
-    
-    // using a long and a base:
-    stringOne =  String(millis(), DEC);
-    // prints "123456" or whatever the value of millis() is: 
-    Serial.println(stringOne);      
-
-  // do nothing while true:
-  while(true);
-
-}

build/shared/examples/8.Strings/StringReplace/StringReplace.ino

@@ -1,35 +0,0 @@
-/*
-  String replace()
- 
- Examples of how to replace characters or substrings of a string
- 
- created 27 July 2010
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/StringReplace
- 
- This example code is in the public domain. 
- */
-
-void setup() {
-  Serial.begin(9600);
-  Serial.println("\n\nString  replace:");
-}
-
-void loop() {
-  String stringOne = "<html><head><body>";
-  Serial.println(stringOne);
-  // replace() changes all instances of one substring with another:
-  String stringTwo = stringOne.replace("<", "</");
-  Serial.println(stringTwo);
-
-  // you can also use replace() on single characters:
-  String normalString = "bookkeeper";
-  Serial.println("normal: " + normalString);
-  String leetString = normalString.replace('o', '0');
-  leetString = leetString.replace('e', '3');
-  Serial.println("l33tspeak: " + leetString);
-
-  // do nothing while true:
-  while(true);
-}

build/shared/examples/8.Strings/StringToIntRGB/StringToIntRGB.ino

@@ -1,230 +0,0 @@
-/*
-  Serial RGB controller
- 
- Reads a serial input string looking for three comma-separated
- integers with a newline at the end. Values should be between 
- 0 and 255. The sketch uses those values to set the color 
- of an RGB LED attached to pins 9 - 11.
- 
- The circuit:
- * Common-anode RGB LED cathodes attached to pins 9 - 11
- * LED anode connected to pin 13
- 
- To turn on any given channel, set the pin LOW.  
- To turn off, set the pin HIGH. The higher the analogWrite level,
- the lower the brightness.
- 
- created 29 Nov 2010
- by Tom Igoe
- 
- This example code is in the public domain. 
- */
-
-String inString = "";    // string to hold input
-int currentColor = 0;
-int red, green, blue = 0;
-
-void setup() {
-  // Initialize serial communications:
-  Serial.begin(9600);
-  // set LED cathode pins as outputs:
-  pinMode(9, OUTPUT);
-  pinMode(10, OUTPUT);
-  pinMode(11, OUTPUT);
-  // turn on pin 13 to power the LEDs:
-  pinMode(13, OUTPUT);
-  digitalWrite(13, HIGH);
-}
-
-void loop() {
-  int inChar;
-
-  // Read serial input:
-  if (Serial.available() > 0) {
-    inChar = Serial.read();
-  }
-
-  if (isDigit(inChar)) {
-    // convert the incoming byte to a char 
-    // and add it to the string:
-    inString += (char)inChar; 
-  }
-
-  // if you get a comma, convert to a number,
-  // set the appropriate color, and increment
-  // the color counter:
-  if (inChar == ',') {
-    // do something different for each value of currentColor:
-    switch (currentColor) {
-    case 0:    // 0 = red
-      red = inString.toInt();
-      // clear the string for new input:
-      inString = ""; 
-      break;
-    case 1:    // 1 = green:
-      green = inString.toInt();
-      // clear the string for new input:
-      inString = ""; 
-      break;
-    }
-    currentColor++;
-  }
-  // if you get a newline, you know you've got
-  // the last color, i.e. blue:
-  if (inChar == '\n') {
-    blue = inString.toInt();
-
-    // set the levels of the LED.
-    // subtract value from 255 because a higher
-    // analogWrite level means a dimmer LED, since
-    // you're raising the level on the anode:
-    analogWrite(11,  255 - red);
-    analogWrite(9, 255 - green);
-    analogWrite(10, 255 - blue);
-
-    // print the colors:
-    Serial.print("Red: ");
-    Serial.print(red);
-    Serial.print(", Green: ");
-    Serial.print(green);
-    Serial.print(", Blue: ");
-    Serial.println(blue);
-
-    // clear the string for new input:
-    inString = ""; 
-    // reset the color counter:
-    currentColor = 0;
-
-  }
-
-}
-
-
-/*
-Here's a Processing sketch that will draw a color wheel and send a serial
-string with the color you click on:
-
-// Subtractive Color Wheel with Serial
-// Based on a Processing example by Ira Greenberg. 
-// Serial output added by Tom Igoe
-// 
-// The primaries are red, yellow, and blue. The secondaries are green, 
-// purple, and orange. The tertiaries are  yellow-orange, red-orange, 
-// red-purple, blue-purple, blue-green, and yellow-green.
-// 
-// Create a shade or tint of the subtractive color wheel using
-// SHADE or TINT parameters.
-
-// Updated 29 November 2010.
-
-
-
-import processing.serial.*;
-
-int segs = 12;
-int steps = 6;
-float rotAdjust = TWO_PI / segs / 2;
-float radius;
-float segWidth;
-float interval = TWO_PI / segs;
-
-Serial myPort;
-
-void setup() {
-  size(200, 200);
-  background(127);
-  smooth();
-  ellipseMode(RADIUS);
-  noStroke();
-  // make the diameter 90% of the sketch area
-  radius = min(width, height) * 0.45;
-  segWidth = radius / steps;
-
-  // swap which line is commented out to draw the other version
-  // drawTintWheel();
-  drawShadeWheel();
-  // open the first serial port in your computer's list
-  myPort = new Serial(this, Serial.list()[0], 9600);
-}
-
-
-void drawShadeWheel() {
-  for (int j = 0; j < steps; j++) {
-    color[] cols = { 
-      color(255-(255/steps)*j, 255-(255/steps)*j, 0), 
-      color(255-(255/steps)*j, (255/1.5)-((255/1.5)/steps)*j, 0), 
-      color(255-(255/steps)*j, (255/2)-((255/2)/steps)*j, 0), 
-      color(255-(255/steps)*j, (255/2.5)-((255/2.5)/steps)*j, 0), 
-      color(255-(255/steps)*j, 0, 0), 
-      color(255-(255/steps)*j, 0, (255/2)-((255/2)/steps)*j), 
-      color(255-(255/steps)*j, 0, 255-(255/steps)*j), 
-      color((255/2)-((255/2)/steps)*j, 0, 255-(255/steps)*j), 
-      color(0, 0, 255-(255/steps)*j),
-      color(0, 255-(255/steps)*j, (255/2.5)-((255/2.5)/steps)*j), 
-      color(0, 255-(255/steps)*j, 0), 
-      color((255/2)-((255/2)/steps)*j, 255-(255/steps)*j, 0)
-    };
-    for (int i = 0; i < segs; i++) {
-      fill(cols[i]);
-      arc(width/2, height/2, radius, radius, 
-      interval*i+rotAdjust, interval*(i+1)+rotAdjust);
-    }
-    radius -= segWidth;
-  }
-}
-
-
-void drawTintWheel() {
-  for (int j = 0; j < steps; j++) {
-    color[] cols = { 
-      color((255/steps)*j, (255/steps)*j, 0), 
-      color((255/steps)*j, ((255/1.5)/steps)*j, 0), 
-      color((255/steps)*j, ((255/2)/steps)*j, 0), 
-      color((255/steps)*j, ((255/2.5)/steps)*j, 0), 
-      color((255/steps)*j, 0, 0), 
-      color((255/steps)*j, 0, ((255/2)/steps)*j), 
-      color((255/steps)*j, 0, (255/steps)*j), 
-      color(((255/2)/steps)*j, 0, (255/steps)*j), 
-      color(0, 0, (255/steps)*j),
-      color(0, (255/steps)*j, ((255/2.5)/steps)*j), 
-      color(0, (255/steps)*j, 0), 
-      color(((255/2)/steps)*j, (255/steps)*j, 0)
-    };
-    for (int i = 0; i < segs; i++) {
-      fill(cols[i]);
-      arc(width/2, height/2, radius, radius, 
-      interval*i+rotAdjust, interval*(i+1)+rotAdjust);
-    }
-    radius -= segWidth;
-  }
-}
-
-void draw() {
-  // nothing happens here
-}
-
-void mouseReleased() {
-  // get the color of the mouse position's pixel:
-  color targetColor = get(mouseX, mouseY);
-  // get the component values:
-  int r = int(red(targetColor));
-  int g = int(green(targetColor));
-  int b = int(blue(targetColor));
-  // make a comma-separated string:
-  String colorString = r + "," + g + "," + b + "\n";
-  // send it out the serial port:
-  myPort.write(colorString );
-}
-
-
-*/
-
-
-
-
-
-
-
-
-
-

build/shared/lib/keywords.txt

@@ -183,5 +183,17 @@ parseFloat	KEYWORD2
 readBytes	KEYWORD2
 readBytesUntil	KEYWORD2
 
+# USB-related keywords
+
+Keyboard	KEYWORD3
+Mouse	KEYWORD3
+press	KEYWORD2
+release	KEYWORD2
+releaseAll	KEYWORD2
+accept	KEYWORD2
+click	KEYWORD2
+move	KEYWORD2
+isPressed	KEYWORD2
+
 setup	KEYWORD3	Setup
 loop	KEYWORD3	Loop

build/shared/revisions.txt

@@ -1,3 +1,122 @@
+ARDUINO 1.0.1 - 2012.05.21
+
+[environment]
+
+* The IDE has been internationalized and translated into multiple languages.
+  Thanks to Shigeru Kanemoto for the internationalization and Japanese
+  translation and many others for the other translations.  For more
+  information, see: http://arduino.cc/playground/Main/LanguagesIDE
+
+* Added preference for selecting the language in which to display the
+  Arduino software.  Defaults to the operating system locale.  
+
+* New upload process for the Arduino Leonardo (ATmega32U4).
+
+* The editor font size preference now applies to the serial monitor and
+  error / message console as well as the editor.  (Paul Stoffregen)
+  http://code.google.com/p/arduino/issues/detail?id=550
+
+* Compilation has been speeded up by only compiling changed files.  (All
+  files are recompiled when a new board is selected.)  (Paul Stoffregen)
+  http://code.google.com/p/arduino/issues/detail?id=638
+
+* Console log files (stdout.txt and stderr.txt) are now removed when the
+  Arduino software exits.  (Paul Stoffregen)
+
+* The minimum size for the Arduino software window has been reduced.
+  http://code.google.com/p/arduino/issues/detail?id=52
+
+* Improvements to the Find / Replace dialog.  (Peter Lewis)
+  http://code.google.com/p/arduino/issues/detail?id=825
+
+* Support for selecting words (on double-click) and lines (triple-click)
+  in the Arduino software.  (Peter Lewis)
+  http://code.google.com/p/arduino/issues/detail?id=824
+
+* Don't insert newline when using serial monitor keyboard
+  shortcut. (Lars J. Nielsen)
+  http://code.google.com/p/arduino/issues/detail?id=279
+
+* Added a preference for disabling verification on upload (for increased
+  speed).  (Nathan Seidle)
+  http://code.google.com/p/arduino/issues/detail?id=842
+
+* Added the gcc toolchain to the Linux distribution.  (To use the 
+  toolchain already installed on your system, simply delete the one
+  that comes with the Arduino software.)  (Paul Stoffregen)
+  http://code.google.com/p/arduino/issues/detail?id=300
+
+* Updating Arduino Mini upload protocol to 'arduino' from 'stk500' (should
+  fix problems with auto-reset not working).
+
+[core / libraries]
+
+* Updated (and official) support for the Arduino Leonardo (ATmega32U4).
+  Includes new bootloader and various fixes to the core.  
+
+* Adding overloads to Wire.write() (for Wire.write(0)). (Paul Stoffregen)
+  http://code.google.com/p/arduino/issues/detail?id=527
+
+* Fixing delayMicroseconds() for 20 MHz clocks (Erdem U. Altinyurt)
+  http://code.google.com/p/arduino/issues/detail?id=306
+
+* Support third external interrupt on ATmega1284P. (maniacbug)
+  http://code.google.com/p/arduino/issues/detail?id=728
+
+* Update reference voltage constants for ATmega1284P. (maniacbug)
+  http://code.google.com/p/arduino/issues/detail?id=728
+
+* Adding --relax linker flag for ATmega2560. (arducopter)
+  http://code.google.com/p/arduino/issues/detail?id=729
+
+* Fixing Ethernet library bug on avr-gcc 4.5.1 (SurferTim)
+  http://code.google.com/p/arduino/issues/detail?id=605
+
+* Fixed DHCP hostname generation. (peter)
+
+* Simplifying microseconds to clock cycles conversions (Rob Tillaart)
+  http://code.google.com/p/arduino/issues/detail?id=675
+
+* Fixed various warnings.  (maniacbug)
+  http://code.google.com/p/arduino/issues/detail?id=688
+
+* Fixed bug w/ repeated initial characters in findUntil().  (Jeffery.zksun)
+  http://code.google.com/p/arduino/issues/detail?id=768
+
+* Added INPUT_PULLUP option for pinMode().  The INPUT mode now explicitly
+  disables the pullup resistors.  (Paul Stoffregen)
+  http://code.google.com/p/arduino/issues/detail?id=246
+
+* Fixing bug in the receiving of multiple UDP packets.  (dylan and peter)
+  http://code.google.com/p/arduino/issues/detail?id=669
+
+* Added ability to generate repeated starts in the Wire library (in
+  master mode).  Extra boolean parameters to endTransmission() and
+  requestFrom() control whether or not to send a stop (or a repeated
+  start instead).  (Todd Krein)
+  http://code.google.com/p/arduino/issues/detail?id=663
+
+* Added Ethernet.maintain() to renew DHCP leases.  (Peter Magnusson)
+  http://code.google.com/p/arduino/issues/detail?id=716
+
+* Fix for CLOSE_WAIT bug that could cause Ethernet sketches to crash
+  over time.  (mr-russ and Johann Richard)
+
+* Fix to servo pulse timing calculation. (jwatte)
+  http://code.google.com/p/arduino/issues/detail?id=908
+
+* Added readString() and readStringUntil() functions.  (Adrian McEwen)
+  http://code.google.com/p/arduino/issues/detail?id=454
+
+[examples]
+
+* Updated to latest ArduinoISP sketch. (rsbohn)
+  http://code.google.com/p/arduino/issues/detail?id=378
+
+* Fixed ArduinoISP sketch by lowering delay() in heartbeat.
+
+* Other updates.
+
 ARDUINO 1.0 - 2011.11.30
 
 [environment]

build/windows/dist/drivers/Arduino Leonardo.inf

@@ -86,13 +86,12 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 [SourceDisksFiles]
 [SourceDisksNames]
 [DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0032
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0034&MI_00
+%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0036
+%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_8036&MI_00
 
 [DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0032
-%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0034&MI_00
-
+%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_0036
+%DESCRIPTION%=DriverInstall, USB\VID_2341&PID_8036&MI_00
 
 ;------------------------------------------------------------------------------
 ;  String Definitions