arduino/esp8266
1
0
Fork 0
mirror of https://github.com/esp8266/Arduino.git synced 2025-07-30 16:24:09 +03:00
Code Activity

Sphinx syntax fixes (#9180)

Browse Source 
get rid of warnings when converting python -> rst, force quit when they happen
fix code-blocks, always need extra line
fix invalid headers refs so they actually work
This commit is contained in:
Max Prokhorov
2024-07-31 01:28:46 +03:00
committed by GitHub
parent c2f136515a
commit 1b6f815463
11 changed files with 81 additions and 71 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
doc/ota_updates/readme.rst
View File

@ -216,7 +216,7 @@ Requirements
Application Example
~~~~~~~~~~~~~~~~~~~
Instructions below show configuration of OTA on a NodeMCU 1.0 (ESP-12E Module) board. You can use any other board that meets the `requirements <#basic-requirements>`__ described above. This instruction is valid for all operating systems supported by the Arduino IDE. Screen captures have been made on Windows 7 and you may see small differences (like name of the serial port), if you are using Linux or MacOS.
Instructions below show configuration of OTA on a NodeMCU 1.0 (ESP-12E Module) board. You can use any other board that meets the `requirements <#ota-basic-requirements>`__ described above. This instruction is valid for all operating systems supported by the Arduino IDE. Screen captures have been made on Windows 7 and you may see small differences (like name of the serial port), if you are using Linux or MacOS.
1. Before you begin, please make sure that you have the following software
installed:
@ -336,7 +336,7 @@ Select COM port and baud rate on external terminal program as if you were using
:alt: Termite settings
Then run OTA from IDE and look what is displayed on terminal. Successful `ArduinoOTA <#arduinoota>`__ process using BasicOTA.ino sketch looks like below (IP address depends on your network configuration):
Then run OTA from IDE and look what is displayed on terminal. Successful `ArduinoOTA <#arduino-ide>`__ process using BasicOTA.ino sketch looks like below (IP address depends on your network configuration):
.. figure:: a-ota-external-serial-terminal-output.png
:alt: OTA upload successful - output on an external serial terminal
@ -407,7 +407,7 @@ The sample implementation provided below has been done using:
``ESP8266HTTPUpdateServer`` library,
- NodeMCU 1.0 (ESP-12E Module).
You can use another module if it meets previously described `requirements <#basic-requirements>`__.
You can use another module if it meets previously described `requirements <#ota-basic-requirements>`__.
1. Before you begin, please make sure that you have the following
software installed: