diff --git a/cores/esp8266/Updater.h b/cores/esp8266/Updater.h
index b9f1b3d06..a25cb081b 100644
--- a/cores/esp8266/Updater.h
+++ b/cores/esp8266/Updater.h
@@ -26,7 +26,7 @@ class UpdaterClass {
       Call this to check the space needed for the update
       Will return false if there is not enough space
     */
-    bool begin(size_t size, int = U_FLASH);
+    bool begin(size_t size, int command = U_FLASH);
 
     /*
       Writes a buffer to the flash and increments the address
diff --git a/cores/esp8266/esp8266_peri.h b/cores/esp8266/esp8266_peri.h
index 64c1f30b5..4fd057009 100644
--- a/cores/esp8266/esp8266_peri.h
+++ b/cores/esp8266/esp8266_peri.h
@@ -494,7 +494,7 @@ extern uint8_t esp8266_gpioToFn[16];
 
 //SPI Phase Length Locations
 #define SPILCOMMAND	28 //4 bit in SPIxU2 default 7 (8bit)
-#define SPILADDR	16 //6 bit in SPIxU1 default:23 (24bit)
+#define SPILADDR	26 //6 bit in SPIxU1 default:23 (24bit)
 #define SPILDUMMY	0  //8 bit in SPIxU1 default:0 (0 cycles)
 #define SPILMISO	8  //9 bit in SPIxU1 default:0 (1bit)
 #define SPILMOSI	17 //9 bit in SPIxU1 default:0 (1bit)
diff --git a/doc/eclipse/makefile.init b/doc/eclipse/makefile.init
new file mode 100644
index 000000000..76438d62c
--- /dev/null
+++ b/doc/eclipse/makefile.init
@@ -0,0 +1,39 @@
+vecho := @echo
+Q := @
+
+PROJECT_NAME=project_name
+
+OTA_IP=192.168.254.100
+OTA_PORT=8266
+
+SERIAL_PORT=COM3
+SERIAL_BAUD=230400
+
+ARDUINO_BASE      = D:/Coding/avr/Programme/arduino-nightly
+ESP8266_BASE      = $(ARDUINO_BASE)/hardware/esp8266com/esp8266
+ESP8266_TOOLS     = $(ESP8266_BASE)/tools
+XTENSA_TOOLS_ROOT = $(ESP8266_TOOLS)/xtensa-lx106-elf/bin
+
+PYTHON_BIN        = python
+ESPTOOL_PY_BIN    = $(ESP8266_TOOLS)/esptool.py
+ESPOTA_PY_BIN     = $(ESP8266_TOOLS)/espota.py
+ESPTOOL_BIN       = $(ESP8266_TOOLS)/esptool/esptool.exe
+
+ota:
+    $(vecho) ota...
+    $(PYTHON_BIN) $(ESPOTA_PY_BIN) -i $(OTA_IP) -p $(OTA_PORT) --auth= -f ./$(PROJECT_NAME).bin
+    
+ota_spiffs:
+    $(vecho) ota spiffs...
+    $(PYTHON_BIN) $(ESPOTA_PY_BIN) -i $(OTA_IP) -p $(OTA_PORT) --auth= -s -f ./$(PROJECT_NAME)_spiffs.bin
+        
+erase_flash:
+    $(vecho) "Erase Flash"
+    $(PYTHON_BIN) $(ESPTOOL_PY_BIN) -p $(SERIAL_PORT) -b $(SERIAL_BAUD) erase_flash    
+    
+dumpmem:     
+    $(vecho) "Read Flash need some time..."                                     
+    $(PYTHON_BIN) $(ESPTOOL_PY_BIN) -p $(SERIAL_PORT) -b $(SERIAL_BAUD) read_flash 0 4194304 dump.bin
+
+objdump:
+    "$(XTENSA_TOOLS_ROOT)/xtensa-lx106-elf-objdump" -S $(PROJECT_NAME).elf > $(PROJECT_NAME).dobj